Switch to ARX International Website

A U S T R A L I A N ||| W E B S I T E

Click here to go to ARX Australian Distributors website - The Resource Corp

Click on any of these links to navigate the site



MIXXMaster Six Input Mic/Line Master Mixer


Hand made in Australia

Click on image to see larger version

Entech award pic

ENTECH Award winner "Most Useful Contractor Product"

Features


  • Only 1 RU high
  • Balanced XLR Mic Inputs and Outputs
  • 3 way EQ and Pan controls
  • Switchable Phantom power
  • User friendly layout
  • Flawless performance in any audio environment

Applications


  • Sound Reinforcement
  • Industrial Paging/BGM Systems
  • AV Systems/CD/VIDEO
  • Clubs/Gyms/Karaoke/Restaurants
  • Studio, Live and Broadcast Submixers

More ARX Signal Processing:

Audibox Series

EQ260
EQ130
EQ215

Balance 8
DeBalance 8

BSX12

MSX 48
MSX 32
MSX12

Afterburner
Compo
Quadcomp®II
Sixgate™

8-pre

iSwitch

BarMIX
MIXX
MIXXMaster

MaxiDRIVE

MaxiMIX
MaxiSPLIT

DI6 SM
DI-Plus RC
DI-Plus 2 RC

UniMIX
UniFace


Innovation
ARX introduces the MIXXMASTER 4 channel Microphone/Line Master Mixer, with two Mic/Line inputs, three stereo line inputs (one with 3 way EQ), and Left/Right (or Zone 1 and 2) master level controls. It's the companion product to the MIXX Four channel Microphone Mixer, another innovative mixing product

Great Features
Each Microphone channel on the MIXXMaster has a Balanced Low Noise Mic input, plus 3 way EQ and Pan controls. The Mic input can also be switched to be a Line input as required.
Switchable Phantom power is available on all Mic Inputs.The Stereo Line input 3/4 also has 3 way EQ, while the Stereo Line Inputs 5/6 and 7/8 each have a level control, and all the line inputs are industry standard RCA type connectors. Additionally there are Left and Right Master controls.
The rear panel also has a connector for a push-to-talk jack, and a Priority override switch for Channel 1. Pressing this in will duck the level of the other channels by 20dB when Channel 1 is used.

AC Power
Both the MIXX and MIXXMaster models are available as a 100 to 120V AC model or a 220 to 240V AC model, and AC power is connected to the unit via a standard three pin IEC connector, with built-in fuse and voltage change switch.

With its superb audio quality, massive headroom and intuitive interface, the MIXXMaster and the MIXX series are the total solution to today’s install requirements.

 

 

 

 

 

 

You'll never compromise on Quality when you choose ARX


T E C H N I C A L || S P E C I F I C A T I O N S


Microphone inputs: Electronically Balanced on XLR Connectors
Stereo Line Inputs: Buffered line level inputs on RCA Connectors
Mic Priority Switchable Channel 1 override; 20dB attenuation to all other channels
Input Gain: Variable 20dB-60dB on Mic/Line channels by rear panel trim control, plus Mic/Line input switch
Channel Level: Infinity to +6dB Gain
Channel Pan: True L and R constant level Control

Mic and Line Channel EQ:
Low 100Hz 15dB Cut/Boost Shelving
Mid 800HZ 15dB Cut/Boost Bell, Broad Q
High 10KHz 15dB Cut/Boost Shelving
Frequency Response: 20-20KHz +or- 1dB
Distortion: Below .005% 100Hz to 10KHz
Phantom Power: +48VDC switchable on all Microphone Inputs

Microphone Channel Inputs: Electronically Balanced XLR connector
Master Outputs: Electronically Balanced XLR 300 ohms Line Level
Master Outputs Signal/Noise: -90dB unweighted.
Max Output Level: +20dB
Open Buss Outputs: Virtual Earth Signal Level, 5 pin DIN connector with shielded cable
AC Power Requirements: 100-120/220-240 VAC 50/60HZ 8VA (8 watts) 3 pin IEC connector with removable cable

To MIXX page

Application Notes linkArchitects specs linkbrochure pdf linkmanual pdf link Links to receive the ARX Newsletter or to Email us


Thanks for looking at the range of ARX professional audio products. If you would like to contact us, please click on the Email link above.
Contents © ARX Systems®