A U S T R A L I A N ||| W E B S I T E

Precision Tools for Audio Professionals

Model Options

 Tap-It
Dual Channel unit

• Interfacing with presentation systems
• Pro Audio to Consumer equipment interfacing
• Deriving fully isolated audio feeds

More Audiboxes:

ISO Balancer
ISO De-Balancer
ISO Later
ISO Splitter
ISO Combiner
ISO Optimizer
ISO Switcher

Q Switch

USB DI
USB DI-VC
USB I/O

Amp It Again

Pro DI
AV DI
DI Preamp
Ear Driver
Audibox PSU

TAP-IT Transformer Isolated Audio Line Tapper

With the ongoing convergence of Audio, AV and IT systems, providing a clean audio feed to Wireless and Cabled transmission and recording systems has become a priority for Systems Designers, Integrators and Installers.

Problematic Y leads, the misuse of headphone outputs or jury rigged patch ups need no longer be tolerated because the ARX Design Team has developed the TAP-IT Transformer Isolated Audio Line Tapper as the solution.

Transformer Isolation eliminates the potential for Ground Loops and Hums when connecting different sub-systems together.

The transformers used in the ARX TAP-IT are higher impedance than standard line splitters, to ensure minimal loading and interaction.

Main inputs and outputs are hardwired, so your signal integrity isn't compromised, and the TAP-IT's passive design eliminates the requirement for problematic external power supplies and "wall warts".

The tapped output features switchable High and Low level output, for matching the TAP-IT signal level to both Pro + 4dB and Semi Pro –10dB operating levels.

The heavy duty all-steel chassis is finished in attractive matt textured powdercoat, with hardwearing epoxy screen printing and slip resistant rubber pads. The TAP-IT is a totally passive device with no power requirements, making it a truly universal problem solver.
Security features include Kensington®-type computer lock slot and optional bracket kit for under-table mounting.

Available in Dual Channel format only

Note: Main Inputs & Outputs are hardwired / direct connection

Main Input Connectors 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold, Pin 1 Ground

Main Output Connectors 3 pin male XLR wired Pin 2 + Hot, Pin 3 – Cold, Pin 1 Ground

Ground Reference: Chassis is grounded to Left Main Output Pin 1

Tapped Output:

Optimal Load Impedance 22K ohms or greater

Frequency Response 20Hz - 20 KHz ± 1dB

Maximum Output Level + 20dBm

THD at Max Output 0.2% 30 Hz - 20KHz

Output Connectors 3 pin male XLR wired Pin 2 + Hot, Pin 3 – Cold, Pin 1 N.C

Can be wired Balanced or Unbalanced - see diagram below