Switch to ARX International Website

A U S T R A L I A N ||| W E B S I T E

Click here to go to ARX Australian Distributors website - The Resource Corp

Click on any of these links to navigate the site


8 channel Audio DeBalancer/Level Optimizer

DeBalance 8 front view
Hand made in Australia

Click on image to see larger version (138K)

More ARX Signal Processing:

Audibox Series

EQ260
EQ130
EQ215

Balance 8
DeBalance 8

BSX12

MSX 48
MSX 32
MSX12

Afterburner
Compo
Quadcomp®II
Sixgate™

8-pre

iSwitch

BarMIX
MIXX
MIXXMaster

MaxiDRIVE

MaxiMIX
MaxiSPLIT

DI6 SM
DI-Plus RC
DI-Plus 2 RC

UniMIX
UniFace

Applications


  • Studio, Live Sound and Broadcast
  • Patch Bays
  • AV Systems/CD/VIDEO
  • Anywhere professional balanced signals need converting to un-balanced signals


Innovation
Sooner or later there comes a time when Pro Audio Balanced outputs need to be converted to Unbalanced, to silently interface with the -10dB unbalanced inputs of consumer electronics. Distortion and noise from a mismatch at this point will be amplified throughout the system.
Now there’s a simple and straightforward solution to this problem – the all-new ARX DeBalance 8, an 8 channel audio Debalancer and Level Optimizer specifically designed to handle this critical task.

ARX’s proprietary debalancing circuits take the Balanced +4dB levels from professional audio systems and effortlessly convert them into the unbalanced signals that all units with unbalanced inputs need, such as LCD, LED and plasma screens and other consumer-type products
Inputs are industry standard balanced 3 pin XLR type, and outputs are unbalanced RCA connectors.
Pairs of Gain Mode switches on the front panel let you select unity gain through the DeBalance 8, using it as a debalancer only, or as a level optimizer as well, bringing the +4 dB levels down to –10 dB (–14dB overall loss). Status LEDs on the front panel indicate which mode has been selected.

Housed in a rugged all steel chassis with extruded aluminium front panel, the ARX DeBalance 8 is the ideal professional engineer’s tool for the critical task of impedance and level converting.

ARX Quality
Every day, ARX Audio interface products solve audio problems for thousands of people around the world. We know we’re obsessive about audio quality, but we’re betting that you are, too.

 

 

 

 

You'll never compromise on Quality when you choose ARX


T E C H N I C A L || S P E C I F I C A T I O N S

debalance 8 rear view
DeBalance 8 rear view. Click on image to see larger version (120K)

Input Impedance 44K Ohm Balanced
Input Headroom +24dB
Input Connector Female XLR, wired Pin 1 Gnd, Pin 2 + Hot, Pin 3 – Cold

Output Connector RCA (Phono)
Output Impedance 150 Ohms Unbalanced
Output Level (max) +24dB

Frequency Response 10Hz- 30KHz ±0.25dB
Signal to Noise Ratio -96dB unweighted, -102dB A weighted
Distortion .003% THD, 100Hz, .0025% THD, 1KHz, .00325% THD, 10KHz

Dynamic Range 120dB
Gain Loss
• 0dB Unity, mode switch out,
• –14dB, mode switch in (+4dB to –10dB level matching)
Power 100-120/220-240 VAC 50/60Hz, 5VA (5 watts) on 3 pin IEC connector with removable cable


Architects specs linkbrochure pdf linkmanual pdf link Links to receive the ARX Newsletter or to Email us
Thanks for looking at the range of ARX professional audio products. If you would like to contact us, please click on the Email link above.
Contents © ARX Systems®