ARX MSX 12 Mic/Line Splitter

A U S T R A L I A N ||| W E B S I T E

MSX 12 - 4 in, 12 Out ISO-Transformer Microphone/Line Splitter

Hand made in Australia

Click on image to see larger version (119K)

Features:

Four channel / three way split per channel
Passive unit - no power required
Ultra low noise design
Transformer Balanced Inputs and Outputs
Inputs and Main Outputs hard wired to pass Phantom Power
Intuitive, 'user friendly' layout
Flawless audio performance

Applications:

Houses of worship
Conference centres
Educational facilities
Broadcast splitting

*More ARX Signal Processing:* Audibox Series EQ260 EQ130 EQ215 Balance 8 DeBalance 8 BSX12 MSX 48 MSX 32 MSX12 Afterburner Compo Quadcomp®II Sixgate™ PC-pre2 8-pre iSwitch BarMIX MIXX MIXXMaster MaxiMIX MaxiSPLIT DI6 SM DI-Plus RC DI-Plus 2 RC UniMIX UniFace	About the MSX 12 The ARX MSX 12 Transformer isolated Microphone/Line Splitter has been developed to deliver noise-free audio splitting with minimal setup time. Its intuitive layout and clear, uncluttered labelling enables a quick and easy solution to the increasing complexity of today’s standards of audio production. The MSX 12 is a totally passive device requiring no power, and consists of Four channels of transformer isolated ultra low noise Microphone/Line Splitter. Each of these channels has a direct looped Main/FOH feed, and a transformer isolated Monitor split on the front panel.
	On the rear panel is an Auxiliary transformer isolated split ideal for use with a remote recording truck or TV feed. Marker panels on the front provide a space where individual channel connections can be noted. The all-steel chassis of the MSX 12 provides strong interference resistant shielding. Internally, state-of-the-art transformers deliver superb audio quality and total galvanic isolation. The MSX 12 is the easy answer to multi channel signal splitting requirements.	Front Panel detail, showing Input and hard-wired Main output, plus transformer isolated Monitor output

You'll never compromise on Quality when you choose ARX

T E C H N I C A L || S P E C I F I C A T I O N S

Input Impedance 300 Ohms

Output Impedance 2 secondaries @ 600 Ohms each

Frequency Response 30Hz - 20 KHz ± 1dB

Maximum Output Level + 20dBm

THD at Max Output 0.2% 30 Hz - 20KHz @ 20dBm

Insertion Loss 0.5dB @ 1 KHz (600 Ohm source & load)

Input Connectors 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold

Main Output 3 Pin male XLR wired Pin 2 + Hot, Pin 3 – Cold

Monitor & Aux Output Split 3 pin male XLR wired Pin 2 + Hot, Pin 3 – Cold. Audio grounds not connected; Pin 1 is floating.

Weight 5 lbs (2.2 Kg)

Rear Panel detail, showing transformer isolated Split output
and Chassis Ground point

Front Panel

4 x Hardwired balanced XLR Input and Main Outputs. Pin 3–, Pin 2 +, Pin 1 Ground
4 x Hardwired transformer isolated balanced XLR Monitor Splits. Pin 3–, Pin 2 +, Pin 1 floating (not connected)
Marker panel for labelling individual channel assigns

Rear Panel

4 x Hardwired transformer isolated balanced XLR Auxiliary Splits. Pin 3–, Pin 2 +, Pin 1 floating (not connected)
2 x D Sub connectors for Monitor Splits
2 x D Sub connectors for Auxiliary Splits
Screw Terminal Chassis Ground point

Note: No connections to Audio ground

Thanks for looking at the range of ARX professional audio products. If you would like to contact us, please click on the Email link above.
Contents © ARX Systems®