|
|
A U S T R A L I A
N |||
W E B S I T
E
|
|
|
|
 
|
|
|
SPL
SUB18
Integrated
self powered Sub Bass loudspeaker system
|
|
Applications:
Low Frequency enhancement
of:
- Concert Sound
Reinforcement
- Auditorium
Installations
- Dance Clubs
- Houses of
Worship
- Theatre and
Film
- Corporate
A/V
|
Features:
- Fully integrated
amplifier/speaker combination
- High power and low
distortion provide true sonic accuracy
- ISC
system protection for safe high power output
- A flexible Sub Bass
solution for all applications
|
|
Other
powered Loudspeakers:
SPL
8H
SPL
12
SPL
SUB15
SPL
SUB18
|
About the
SPL SUB18
The SPL SUB18 is
an integrated subwoofer and amplifier combination, using
a single 18” long throw driver. It is designed to
provide extended low frequency to enhance existing speaker
systems.
The cabinet is built throughout from premium grade void free
plywood, with extensive bracing to reduce unwanted
coloration, and is painted in multiple textured coats of
catalysed polyurethane.
Although originally designed as a complementary sub bass
cabinet for the SPL12, the SPL SUB18 can easily be used with
other speaker systems. Since its control electronics and
amplifier are built-in, it is the perfect add-on when more
low frequency output is required - for any system!
All that’s required to vary the system setup are some
patch leads and an AC power feed.
Inside
Information
The amplifier
design inside the SPL SUB18 uses existing proven
ARX analog amplifier technology for predictable
operation in all professional applications.
Its transformer based power supply and Mosfet drive
circuitry both enable a reduced parts count for long term
reliability. Plus, with their inbuilt self regulation,
Mosfets are accepted as being the most thermally reliable
and predictable amplifier output stage available.
The 18” bass driver and the output of the amplifier
section are perfectly matched to form a composite unit that
is designed to do only one thing, and do it extremely well.
|
|
Other
Features
- L and R mix to mono
built in. With separate inputs and loop through
outputs for Left and Right channels, the SPL SUB18 needs
no special setting up when run in a mono Sub
configuration.
- Phase Switch and
Level control on rear panel for compatibility with
existing systems
- Locking AC power
connectors. By using the Neutrik PowerCon design, the
power connector locks to the cabinet, avoiding the
problem of a connector vibrating loose during a
performance.
- An extra auxiliary AC
power output is fitted as standard, so that systems
can be powered in a serial/daisy chain layout rather than
a radial manner, thus reducing the cabling required. (See
Technical Note SPL Wiring
info)
Benefits
The benefits, both
acoustic and practical, of this amplifier / speaker
combination are many:
- Improved speaker
response. The close-coupled design delivers greater
actual power at the speaker and improves the damping
factor.
- Thermal
reliability. Thanks to our unique heat
exchange/cooling design, the harder the system is driven,
the more efficiently the heat exchanger
operates.
- There is no power
loss caused by long runs of loudpeaker cable -
typically 30 meters (100’) or more. All the
amplifier power is delivered to the speaker.
- An elegant all in one
solution - amp, processor, speaker are combined.
There are no amp racks to store and cool, no heavy
speaker cabling to run.
- Reduced number of
connections contributes to inherent low noise, and
greatly reduces the possibility of ground
loops.
To sum up, the SPL SUB18
successfully combines state of the art design with
practical, proven technology to deliver an integrated
Sub-bass speaker/amplifier solution with all the dynamic Low
Frequency impact that today’s audiences expect.
Ordering
Options:
SPL SUB18 'S'
with screw thread fitting to attach screw threaded stand
mount pole for mounting SPL 12 or similar cabinet
SPL SUB18 'C' with cup fitting to attach non-
threaded stand mount pole for mounting SPL 12 or similar
cabinet
|
|
T E
C H N I C A L
|| S
P E C I F I C A T I O N S
|
|
SPL
SUB18 Rear Panel layout.
Click
on image to see larger version (50K)
Frequency response
40Hz - 100Hz +/– 4dB
Loudspeaker type 18” 450mm 8 Ohms
Size 730H x 510W x 580D
Weight 60 Kgs
Input Connectors
3 pin Female XLR, polarity Pin 2 +, Pin 3 –, Pin 1
Ground
Input Impedance 44K Balanced (electronic)
Nominal input level 0dB for nominal rated amplifier
outputs
Input Loop Connectors
3 pin Male XLR, polarity Pin 2 +, Pin 3 –, Pin 1
Ground
Sub Level Control –10dB to +6dB, detented for
0dB
Phase Reverse Normal or 180° reversed
Crossover Frequency
100Hz
Crossover Type 24dB Linkwitz Riley Filter type
Highpass Filter –3dB @ 35Hz 24dB Linkwitz
Riley
Maximum SPL 128 dB peak, 125 dB continuous
Amplifier power 400 Watts RMS 8 ohms, 625 W Peak
Amplifier type Lateral MosFet
THD <.01%
Loudspeaker
protection ISC amplifier anti-clipping circuitry, Relay
muted input, Relay switched output sensing DC and RF
error
Status LEDs AC Power, Protection Active
AC Power 110V / 220V / 240V 50 / 60Hz
AC Power Input Neutrik PowerCon locking type NAC 3
FCA
AC Power Loop Neutrik PowerCon locking type NAC 3
FCB
AC Power protection User resettable external circuit
breaker
AC Wattage Max 600 VA (600 Watts)
Transformer type Toroidal
|
SPL Series
Q & A
| SPL Wiring
info
Thanks for looking at the range
of ARX professional audio products. If you would like to contact us,
please click on the Email link above.
Contents © ARX Systems®
