|
More
ARX Signal Processing:
EQ260
EQ130
EQ215
Audibox
Balance
8
DeBalance
8
MSX
48
MSX
32
MSX
8
Afterburner
Compo
Quadcomp®II
Sixgate™
e-pre
8-pre
iSwitch
BarMIX
AV stream
MIXX
MIXXMaster
MaxiMIX
MaxiSPLIT
DI6SM
DI-Plus
DI-Plus
2
EC-2
|
Features
- All new
Updated version
of our Unique Pro Audio problem solver
- Six Direct boxes,
Microphone
or Line
Splitter and
Line Mixer in one unit!
- Balanced XLR
Mic input with Gain control
- Multiple modes: Six in,
Six out; Six in, One out; One in, Six out
- Individual Output Ground
lift switches
- Up to +15dB Gain
available per channel
- Balanced XLR Outputs;
High Impedance Jack Ins and Outs
- Flawless performance in
any audio environment
|
- - - - - -
Now with
Mic Splitter function!
- - - - - -
|
|
About the
DI6SM
It's a fact of audio
life that a lot of equipment that has to be connected to
professional audio systems isn't impedance or level
compatible.
Interfaces
Unlimited
MP3 players,
Tape/cassette/DVD/CD decks, audio for video, drum machines,
synthesizers, bass guitars, computers; at some stage all
these need linking up to Balanced inputs, whether the
application is Live sound, Studio or Broadcast.
To solve these problems, we've developed the
DI-6SM:
- Six active D.I. (Direct
Injection) boxes,
- plus a 6 into 1
Line Mixer,
- plus a 1 to 6
Microphone or Line Splitter,
All of this in a compact,
all steel 1 RU package.
A Pro
Audio Toolbox
This unique and
flexible audio toolbox allows Six independent unbalanced
audio sources to easily and quietly interface with Balanced
pro audio systems, either to individual channels or summed
down to one Master output.
But
that's not all.
By pressing a single switch on the rear panel the DI-6SM
will change modes - from 6 Direct Boxes plus Mixer to being
a 6 way Splitter (mic/line distribution amplifier). Now it
will split an incoming microphone or line signal to 6
individual outputs or zones, with an XLR Loop Out to send
the microphone output off to a mixing desk as well.
Switchable phantom power and Gain trim for the Mic input
completes this new package
On the front panel, each channel has 2 IN/OUT jacks, a level
control from infinity (off) through 0dB to +15dB gain, and a
Clip indicator LED.
The Master section has a Master volume control and status
LEDs indicating whether the unit is in DI+Mixer or in
Splitter mode. For your convenience there is also a balanced
jack Mix output on the front panel, in parallel with the
balanced XLR Mix output on the rear panel.
In addition, as on all ARX single rack unit equipment, each
channel has a numbered marker panel ('scribble strip') you
can write on for easy confirmation of channel
assigns.
|
|
Balanced
Outputs
On the rear, each
channel has an XLR Balanced output, with associated Ground
lift switch and status LED, to isolate the chassis and
electronic grounds.
The Master section has a Balanced XLR output on the rear,
and a Balanced Jack output on the front panel. In addition
there is a Balanced XLR input with a switch to put the unit
in either DI + Mixer or into Splitter mode. In Splitter mode
there is a switch to toggle between Microphone and Line
level input, as well as a Phanrom Power switch and a Loop
Output for a mic signal to go to a Miing desk as
well
Universal
AC Power
AC power range is a
universal 100 to 120V or 220 to 240V AC, and is connected to
the unit via a removable power lead and standard 3 pin IEC
connector, with built-in fuse and voltage change switch.
With so many handy functions, plus a true 'user friendly'
layout, it's no wonder people call the DI-6SM 'A total
Audio Patching System in 1 RU!'
You'll never compromise on
Quality when you choose ARX
|
