I N T E R N A T I O N A L || W E B S I T E

Click on any of these links to navigate the site
Links to receive the ARX Newsletter, CD Rom, or to Email us


Precision Tools for Audio Professionals

Remote Selector
Model Options

Front View


 
Rear View

 

Remote Selector
Dual Channel unit with two sets of XLR Outputs and one set of XLR Inputs

Top View 

12 - 24 V DC Power required for Mode 1 usage

More Audiboxes:

Blue DI

USB DI-Plus
(USB Plus Analog)

USB DI-Plus VC
(USB Plus Analog)

USB DI
USB DI-HP
USB DI-VC

USB I/O
USB I/O-VSR

SuperSplitter

ISO Balancer
ISO Balancer-VC

ISO Balancer DI

ISO De-Balancer
ISO Later
ISO Splitter
ISO Combiner
ISO Switcher
ISO Selector

Remote Switcher

Q Switch

Pro DI
AV DI
Ear Driver

DI-Plus RC
DI-Plus2 RC

Remote Selector

The simplest ideas are usually the best! ARX's new Remote Selector is a stereo out signal selector for the extremely popular Audibox range.

The new Remote Selector silently switches a stereo pair of XLR female input connectors to either A or B pairs of male XLR outputs

ARX ‘SoftSwitch’ technology achieves this with no loud bangs through the audio system when switching.

Output Channel control can be selected in 2 ways:

Mode 1 by remote switch / relay closure (using an external power pack / wall wart), or

Mode 2 by 12 - 24VDC

Typical applications include remote controlled zoning, loudspeaker selection, and A-B comparison of audio units.

With no DC voltage applied, Output A, the default normal audio signal, is selected.

When +12 – 24VDC is applied to Pins 3 and 4 on the Dinkle type connector, then Output B is selected.

Another useful application is remotely switching between 2 bands, or Live Band and DJ when both are using different Speaker system.

Note - Connectors are inserted in the top of the unit. Please allow adequate space above the Remote Selector to allow for the connectors to be removed or inserted. 

Precision engineered
Most of the Audibox range share a common footprint and manufacturing platform. Offset lid screws enable close side-by-side mounting of multiple units.

  

Hand Made in Australia

T E C H N I C A L || S P E C I F I C A T I O N S

 

Frequency Response: 10Hz to 50KHz + - 0.5dB

Power Requirements: DC Input +12 – 24 VDC Connector 2.5mm centre pin

Remote Switch and External Input: 4 Pin Dinkle type socket, 5mm pin spacing. Connector supplied with unit

Pin 1 and 2 Remote Switch – Open Input = Channel A selected, Closed Input = Channel B selected.

Pin 3 and 4 Remote DC control – Pin 3 +12 - 24VDC Pin 4 0VDC / Gnd

Connections:
Input Connectors: Female XLR, Wired Pin 1 Audio Ground, Pin 2 + Hot, Pin 3 – Cold

Output Connectors A and B: Male XLR, Wired Pin 1 Audio Ground, Pin 2 + Hot, Pin 3 – Cold

Chassis Ground/Earth: Via Pin 1's on Left Channels

Construction: All-steel polyurethane coated chassis, fibreglass PCB

 

Operating Mode Schematics



Links to receive the ARX Newsletter or to Email us


Thanks for looking at the range of ARX professional audio products. If you would like to contact us, please click on the Email link above.
Contents © ARX Systems®