The
ultimate microphone pre-amp for hard-disk
recording
|
Features
|
- Superlative
sound
- Studio
quality mic preamp
- Total
control - Input Gain, EQ contour, Output Gain, Overload
indicator
- Multiple
output connectors
- XLR/jack
combo input
|
- Switchable
48 V DC Phantom Power for condenser Mics
- Compact,
computer friendly package
- Needs
no external power supply
|
|
|
ARX is proud to introduce
the e-pre
- the ultimate microphone pre-amp for hard disk recording,
designed by audio professionals, not computer engineers. The
all-new e-pre
is so much a part of your system that it fits right into a
spare 5¼" slot in your computer case! It's the perfect
tool for all your day-to-day recording requirements. No
equipment racks to plug in, no masses of cabling to connect
- the e-pre
is ready and waiting when you need it.
The e-pre
is a studio quality microphone pre-amp using the same
internal components as high end mixing consoles, built into
a compact, computer friendly package.
It has controls for:
- Input
Gain - fully
variable from 10dB through to 60dB to suit all types of
microphones, plus switchable 48 V Phantom Power to enable
condenser microphones to deliver their best.
- A
Contour
control for EQ sweetening, providing fast, easy access to
a whole range of useful EQ curves
- Output
level control -
fully variable to match the e-pre's
output to the input of the sound card. From -10dB
consumer cards through to +4dB for professional sound
cards, the e-pre
can handle it.
Multiple output connectors
match up with any kind of sound card, including mini jacks,
standard jack, RCA (phono) plugs, and even a connector to
link to the internal CD ROM audio input of your sound card
(if fitted).
We've even fitted a 12 VDC input connector on the rear to
enable the e-pre to run from an external power supply
if required (eg for use with notebook computers or
stand-alone use).
Any way you look at it, the
e-pre
by ARX is the total professional microphone pre-amp for all
your hard disk recording needs
|
|
e-pre
Benefits
- Professional
Balanced XLR mic input
- True 48v
phantom power
- Runs
into the Line input of ANY sound card - uses the card
you've already paid for
- High
headroom = clean recordings
- Smart
EQ
- Compatible
with non-computer audio equipment
- Professional
performance and specs in a user friendly
package
|
|
Rear panel showing power
connectors and audio outputs
|
|
T E
C H N I C A L
|| S
P E C I F I C A T I O N S
|
- Input
Impedance
Mic 2 K Ohms Balanced; XLR type Pin 1 Audio
Ground, Pin 2 +, Pin 3-
Line 25 K Ohms Balanced, ¼" TRS jack Tip +,
Ring , Sleeve Audio Ground
- Phantom
Power Voltage
Switchable +48 V DC on XLR Pins 2 and 3
- Max
Input Level
Mic +15 dB, Line +20 dB
- Input
Gain 10 dB
Minimum, variable to 60 dB Maximum
- Output
Level -10
dB variable through 0 dB to +4 dB
- Overload
Indicator
Measured at all Gain points throughout the
circuitry
- Output
Noise -90
dB Unweighted, -97 dB 'A' weighted
(Measured with Gain nominal 20 dB, Output level -10
dB)
- Frequency
Response
20 - 20 KHz ± 0.25 dB
- Distortion
100 Hz 0.0085%
1 KHz 0.008%
10 KHz 0.0083%
(Measured with Mic Gain 20 dB, Output 0 dB)
- Power
Requirements
12 V DC from either computer supply or external
supply (external power supply not included in e-pre
package)
- Size
148mmW x 42mmH x
150mm D (5¾"W x 1¾H x 6"D)
- Weight
Under 1 Kilo (2.2 lbs)
|
Thanks for looking at the range
of ARX professional audio products. If you would like to contact us,
please click on the Email link above.
Contents © ARX Systems®
