All about
AutoLink™
and
the ZA
amplifiers If you insert a lead into
the Input of Channel 1, the signal will automatically be
routed through Channels 2 to 8 as well, linking all 8
channels from a single source without having to link them
manually (i.e. 1 signal to 8 zones).
The ZA 400, 600 and 800
amplifiers feature AutoLink(tm),
an exclusive and unique internal patching system first seen on the
ARX Multi Q parametric equalizer. It allows all channels to be linked
as required, individually or in multiples.
What exactly does this mean? Here’s an example:
However, if you insert
another input lead from a different source into, say,
Channel 3, then this new signal will run through Channels 3
to 8, leaving Channels 1 and 2 with your original
signal.
If you insert another input
lead from another different source into, say, Channel 5,
then this signal will run through Channels 5 to 8. And so
on.
Naturally if you need a different signal in each amplifier
channel then you can just plug into them normally on a 1 to
1 basis.
In this way the ZA 400, 600 and 800 amplifiers can be easily and
quickly configured for single and multiple zones without the need
for an external splitter/line distribution system.
The AutoLink feature does not appear on the ZA 5.1
surround amplifier, since it is by definition a dedicated special
purpose unit designed to be driven with discrete channels from a
surround decoder.
To ZA 400
page
|| To
ZA 600 page
|| To
ZA 800 page
|| To
ZA 5.1 page
Thanks for looking at the range
of ARX professional audio products. If you would like to contact us,
please click on the Email link above.
Contents © ARX Systems®